PermaCem Automix Dual
Features and Benefits
Dual-cure system· Light-cure in as little 40 seconds for maximum speed or allow the material to self-cure for increased working time
Zero expansion
· Safe for all restorations, including ceramic crowns
AutoMix delivery system
· Ensures predictable, accurate, consistent and homogenous mix every time
Material is dispensed with an applicator gun and automixed in mixing cannulas
· No mixing, no air bubbles, no wasted material due to over mixing
Cartridges incorporate separate outlets for base and catalyst
· Distinct outlets prevent cross contamination
· Less waste in mixing tip than created by hand mixing
· Economical
Fluoride release
· Reduces secondary caries
Fast setting
· Quick cementation
Radiopaque
· Can be identified on an x-ray
Minimal heat generated during polymerization
· Protects pulp
Insulates prep against thermal sensitivity
· Provides greater patient comfort
Low film thickness
· Provides easy placement of crowns and bridges
Composite Viscosity
· Ensures precise placement
Click here to download Adobe® Acrobat® Reader®.
| Property | Value | |
|---|---|---|
| 1 | Composition | Ionomer glass in a Bis-GMA based matrix of dental resins, activator, catalyst and pigments. |
| 2 | Working Time | 2 minute |
| 3 | Setting Time | Light-Cure: 40 seconds Self-Cure: 5 minutes intra-oral set time |
| 4 | Film Thickness | <17μm |
| 5 | Compressive Strength | 200 MPa |
| 6 | Flexural Strength | 100 MPa |
| 7 | Radiopacity | 200% |
| 8 | Water Sorption | 200 μ/mm^3 |
Click here to download Adobe® Acrobat® Reader®.



